二層臺逃生裝置
作者:
來源:
發(fā)布時間:2022-03-10 14:57
逃生裝置的構成及功能(示意圖見下頁)
Composition and Functions of Escape Device(Scheme as shown in the following page)
①②懸掛體—用于導向繩和緩降器的安裝固定,
且保護緩降器,位于整套裝置上的固定點,通過繩套與井架固定連接.
①②Suspension body—used for installation and fixing guide line and descending device, and protecting descending device. The fixing point on the whole set of device is fixed and attached to the derrick through rope slings.
③RG10D緩降器—自動保持下降速度的均勻性,上、下拉繩繞過緩降器上、下運動。
③RG10D descending device—automatically keep consistency of descending speed, and pull the rope up and down round the descending device for upward and downward movements.
④導向繩—引導下滑路徑,承擔載荷,上連懸掛體,下連地錨。
④Guide line—used for guiding downslip path, assuming load, and connection upward to the suspension body and downward to ground anchor.
⑤手動控制器ABS-12—可手動調(diào)節(jié)下滑速度,
沿導向繩上、下運動。
⑤ Manual controller ABS-12—used for manual adjustment of downslip speed, and upward and downward movememt along guide line.
⑥⑦上(下)拉繩—又叫限速拉繩,繞過緩降器連接兩個手動控制器,限制下滑速度。
⑥⑦ Up (down) pulling line—also termed as restricted speed pulling line, connected to two manual controllers round descending device to restrict downslip speed.
⑧地錨(逃生落地點)--固定導向繩的下端,地錨長度為1.3m,直徑為80mm埋入地下約1m至1.2m。
⑧ Ground anchor (escape landing point)—fixing lower end of guide line, and buried about 1.2m underground.
⑨多功能安全帶—保持人體的均勻受力,舒適安全,
與手動控制器上的兩掛掛鉤相連;
⑨ Multi-function safety belt—used for maintaining uniform stress of human body, comfort and safe, connected to the two hookups on the manual controller;